ปั้มไฮดรอลิก คุณภาพสูงจากใต้หวัน มีให้เลือกหลายรุ่นหลายขนาดสามารถสร้างแรงดันได้สูงสุดถึง 700 bar หรือ 10000 psi มีทั้งที่เป็น hand pump , motor pump มาพร้อมกับคู่มือการใช้งานและการรับประกันคุณภาพสินค้าถึง 12 เดือน สินค้าได้รับ มาตราฐาน ISO-9001,CE

Featuring

Hand, Electric, Air and Gasoline powered models, with multiple reservoir and valve
configurations, OMASTAR offers a wide range of hydraulic pumps to satisfy your various needs.
PUMP SELECTION
Choosing the Right Pump
Step 1 – Select the hydraulic cylinder that best suits the application.
Step 2 – Select the series of hydraulic pump with adequate oil output and reservoir capacity to power cylinder.
Step 3 – Select pump within series with the valve option that is best suited to the cylinder and application.

pump HHB-2000
Munual Pump Aluminum Pump
HHB-7000_7000S EPA-21621-1
Big oil Hand Pump Hight Pressure Pump
CB-630E cb-160
Electric Pump ENGINE  PUMP

Cordless Hydraulic Pump

CONSIDERATIONS:
What maximum system operating pressure (bar) is required?
What volume of oil delivery is required? (For manual pumps, cm3 of oil per handle stroke; for powered pumps, l./min. of oil).
Is a single- or 2-speed pump required? (2-speed pumps deliver high oil volume at low pressure for rapid cylinder piston advance, then shift to to the high pressure, low volume stage under load).


What is the preferred source of power?

a) Manual (hand or foot operated). Provides portability, can be used where electricity or shop air are not available.
b) Air Hydraulic. Uses shop air or a portable air compressor.
c) Electric Hydraulic. What voltage is available?
d) Gasoline Engine Hydraulic. Powers high-output pumps at remote job sites where air or electricity are unavailable.
Is portability of the pump a factor to consider?
Will the pump be used intermittently, or will it need to provide high-cycle operation? Does the application require that the pump be capable of starting under load?
Is fluid heat build-up a factor in your application? High cycle applications may require a larger capacity oil reservoir for cooling. Also, if you are using large displacement cylinders, the reservoir capacity must be sufficient to fully extend the piston of the cylinder. Will the application require large displacement or multiple cylinders? Reservoir size and pump output levels will be factors to consider.
Does the working environment require a pump having a low operating noise (dBA) level?
Must the pump operate in a spark-free environment?