Bearing Heater :
เครื่องมือที่ใช้สำหรับให้ความร้อนกับตลับลูกปืนหรือแบริ่ง เพื่อช่วยให้การใส่แบริ่งหรือตลับลูกปืนทำได้ง่ายและสะดวกยิ่งขึ้นตั้งแต่ขนาดเล็กถึงขนาดใหญ่ เครื่องทำความร้อนตลับลูกปืนด้วยระบบการเหนี่ยวนำกระแสไฟฟ้า (induction) เป็นวิธีที่ถูกต้องที่สุดและยังมีระบบการล้างสนามแม่เหล็ก ที่เกิดขึ้นจากการเหนี่ยวนำของกระแสไฟฟ้า อัตโนมัติ ซึ่งช่วยป้องกันไม่ให้ตลับลูกปืน หรือชิ้นส่วนใด ๆ ที่ผ่านการทำความร้อนแล้ว กลายเป็นแม่เหล็กที่ดึงดูดเอาเศษโลหะ หรือสิ่งแปลกปลอมอื่นๆ ที่อยู่ใกล้เข้ามาในตัวตลับลูกปืน โดยการฮีตให้ความร้อนเป็นวิธีที่ถูกต้องสำหับการติดตั้งตลับลูกปืน
Feature
It is widely applied in the heating design manufacture installation repair service and various kinds of circumstances integration design safe reliable and easy to operate. Fast temperature setting, sound signal, temperature display ,overheat protection ,automatic keeping warm.
ทำไมต้องฮีตแบริ่ง แล้วทำแบบใหนถูกต้องที่สุด!!!!!
VDO แนะนำ
 |
Feature.
- UMH-60 High Performance Heater Plate, suitable for heating Mini Bearing and abnormal work pieces.
Specification.
- Model UMH-60
- Voltage/current v. 220 v.
- Power rating 1300 W
- Frequency 50/60 Hz
- Temperature Cotrol 60 – 250 ̊c
- Control precision ± 3 ̊c
- The fluctuant temperture of panel ± 7 ̊c
- Panel dimension mm. 390 x 190 mm.
- Figure dimension mm. 400x220x145 mm.
|
ราคา 69,000บาท
|
|
 |
Feature
- Manual/automatic demagnetization * Time display switch on temperature mode. * Induction coil outside the heater’s housing allows shorter heating time and lower energy consumption * Easy-to-operate control panel and LCD display * Equiped with suitable portable case.
Specification
- Model UMH-100
- Voltage/current v.220 v. / 10 A
- Power rating2.5 KVA
- Frequency50/60 Hz
- Min bore diameter of work piece (Vertical/horizontal) mm 15 / 60 mm.
- Max.O.D of Work Piece mm 220 mm.
- Max width of work Piece (Vertical/horizontal) 65 / 95 mm.
- Max weight of bearing / other parts 12 / 9 kg
- Max. temperature approx 150 ̊c
- Mass Heater body Incl.Yokes 18 kg
- Figure dimension mm. 240x200x235
Accessories free
- Standard yoke size 11x10x150 Min bore diameter of work piece 20 mm.
- Standard yoke size 14x14x150 Min bore diameter of work piece 30 mm.
- Standard yoke size 20x200x150 Min bore diameter of work piece 45 mm.
- Standard yoke size 30x30x150 Min bore diameter of work piece 65 mm.
- Standard yoke size 40x40x150 Min bore diameter of work piece 60 mm.
|
ราคา 114,000 บาท |
|
 |
Feature: UMH-200N
- Plastic molded heater body design
- Adjust output power automatically/ manually :
- Current overload /overheat Protection
- Manually adjustable output power (2 levers)
- Manual/automatic demagnetization
- Time display switch on temperature mode
- Powerful design for demanding industrial application
- Maximum capacity for both work piece size and heating capacity
- Data hold function
Specification
- Model. UMH-200N
- Voltage/current 220 v /16 A
- Power rating 3.6 kva
- Frequency 50/60 Hz
- Min bore diameter of work piece (Vertical/horizontal) mm 20 mm. / 120 mm.
- Max.O.D of Work Piece mm 480 mm.
- Max width of work Piece (Vertical/horizontal) 130 mm / 195 mm.
- Max weight of bearing / other parts 50 / 35 kg
- Max. temperature approx 240 ̊c
- Mass Heater body Incl.Yokes 29 kg
- Figure dimension mm. 508 x 307 x 340 mm.
Accessories free.
- Standard yoke size 14x14x250 Min bore diameter of work piece 20 mm.
- Standard yoke size 20x20x250 Min bore diameter of work piece 30 mm.
- Standard yoke size 30x30x250 Min bore diameter of work piece 45 mm.
- Standard yoke size 45x45x250 Min bore diameter of work piece 65 mm.
|
ราคา 156,000 บาท |
|
 |
Feature *
- Adjust output power automatically/manually
- Current overload /over heat Protection
- Manually adjustable output power (2 levers)
- Manual/automatic demagnetization
- Time display switch on temperature mode
- Data hold function
Specification
- Model UMH-220D
- Voltage/current 220 v. / 25 A
- Power rating 5.5 KVA.
- Frequency 50/60 Hz.
- Min bore diameter of work piece (Vertical/horizontal) mm 20 / 80 mm.
- Max.O.D of Work Piece mm 510 mm.
- Max width of work Piece (Vertical/horizontal) 165 / 220 mm.
- Max weight of bearing / other parts 65 / 45 kg.
- Max. temperature approx 240 ̊c
- Mass Heater body Incl.Yokes̶ 56 kg.
- Figure dimension 550x320x410 mm.
Free Standard yoke
- Standard yoke size 14x14x280 Min bore diameter of work piece 20 mm.
- Standard yoke size 20x20x280 Min bore diameter of work piece 30 mm.
- Standard yoke size 30x30x280 Min bore diameter of work piece 45 mm.
- Standard yoke size 40x40x280 Min bore diameter of work piece 60 mm.
- Standard yoke size 55x55x280 Min bore diameter of work piece 80 mm.
|
ราคา 216,000 บาท
|
 |
Feature
- Manual/automatic demagnetization
- Time display switch on temperature mode
- Powerful design for demanding industrial application
- Maximum capacity for both work piece size and heating capacity
- Swing arm yokes design
Specification
- Model UMH-3800N
- Voltage/current 400/30 A
- Power rating 12 kva.
- Frequency 50/60 Hz
- Min bore diameter of work piece (Vertical/horizontal) mm 60/180 mm.
- Max.O.D of Work Piece mm 1020 mm.
- Max width of work Piece (Vertical/horizontal) 375/315 mm.
- Max weight of bearing / other parts 600/450 kg
- Max. temperature approx 240 ̊c
- Mass Heater body Incl.Yokes 300 kg
- Figure dimension mm. 1460x700x1100 mm.
Free Standard yoke.
- Standard yoke size 40x40x600 Min bore diameter of work piece 60 mm
- Standard yoke size 60x60x600 Min bore diameter of work piece 85 mm
- Standard yoke size 85x85x600 Min bore diameter of work piece 1255 mm
|
ราคาสอบถาม |
ต้องการสอบถามรายละเอียดสินค้าหรือใบเสนอราคา
บริษัท บอร์น เอ็นจิเนียริ่ง จำกัด
BORN ENGINEERING CO.,LTD
Tel.0 2408 9188 Fax.0 2408 9189
Hot line : 098-281 -7550
|

|
WWW.TOOLSHOP88.COM
เชิญกรอกข้อมูลเพื่อขอรับส่วนลดพิเศษครับ กรุณาระบุ เขต และจังหวัดด้วยครับ
*การรับประกันสินค้า *รับประกันสินค้าเป็นเวลา 1 ปี*
บริการพิเศษ
1.มีบริการสาธิตก่อนการใช้งาน(ในเขตกรุงเทพฯและปริมณฑล)
การชำระเงิน
1.ชำระเงินสด
2.โอนเงิน ผ่านธนาคาร ท่านสามารถดูรายชื่อธนาคารจากหน้า “ชำระเงิน”
การส่งสินค้า
1.กรุงเทพฯและปริมณฑล จัดส่งฟรีภายใน 1-3 วัน ทำการ
2.ต่างจังหวัดฝากขนส่งตามจังหวัดต่างๆ เก็บเงินปลายทาง
3.ส่ง ทางพัสดุไปรษณีย์ ผู้ซื้อจ่ายค่าขนส่ง(เมื่อส่งแล้วท่านสามารถตรวจสอบสถานะการเดินทางของพัสดุ ได้จากโปรแกรม Track&Trace ของไปรษณีย์ ว่าปัจจุบันเดินทางไปถึงไหนแล้วเว็บไซท์ทางด้านซ้าย
Comments are closed.